APPLICATION DIRECTIONS
for Spa Magic and Penetrating Spa Cleanser

For best results, we suggest that before putting Spa Magic in the spa water, the existing contaminant build-up in the spa system should be removed by using our Penetrating Spa Cleanser product.

Step One

Penetrating Spa Cleanser Application

• Remove the spa filter cartridge from the filter housing and store in a safe place during the cleaning process. It is recommend that the filter also be cleaned with the Penetrating Spa Cleanser or replaced if necessary.


• Using the existing spa water, pour in one 16-ounce bottle of the Penetrating Spa Cleanser. If the spa is five or more years old, use two bottles.


• Circulate the spa water at a temperature of 90 degrees for a minimum of 8 hours per day for seven days. If Bromine has been used in the spa water, circulate the spa water for at least 10 days.


• After seven to ten days, drain the water, and flush the spa with fresh water. Fill the tub up to the foot well area, then drain and clean the well. This will aid in completely flushing contaminants from your spa.


• Clean both sides of the spa cover with soap and water. If the cover is cracked or torn, we recommend it be replaced.
  VERY IMPORTANT: If your spa cover has a zipper closure it is important to unzip the cover but do not remove the cover because it is difficult to put back on. Flush the inside of the cover with your garden hose. The inside of spa covers have been known to harbor mold and bacteria, all of which drip from condensation through the cover back into the spa water.


• We recommend using baking soda or Penetrating Spa Cleanser for cleaning the spa tub and Penetrating Spa Cleanser for cleaning the spa filters. Do not use chemical filter cleaners or any household cleaners that have chemicals in them when you put water back in your spa, because the chemicals may react with the water and cause an odor or cloud the water in tub.


• We strongly suggest that the spa not be used during the contaminant cleaning process.

 

Step Two

Spa Magic Application

• Add one 16-ounce bottle of Spa Magic for each 500 gallons of spa water.


• After the water has reached the desired temperature, check the PH to ensure it is in the range of 8.0 to 8.4. You do not need to check your PH on a regular basis because the Spa Magic will maintain the PH at normal levels automatically. However, because water can be different in different areas, we recommend that first time users of Spa Magic check the PH of the water for the first 2 weeks to make sure that it maintains the PH at normal level.


• If you use your spa frequently (4-5 times a week), clean its filter every week. If the usage is less clean the filter less often. We recommend rinsing the filter with hot water and soaking it in Penetrating Spa Cleanser and then rinse with water for a thorough cleaning.


• Add another bottle of Spa Magic to the spa water every three months.


• We recommend draining and replacing the spa water every 3 to 6 months.

ENJOY the lowest maintenance, completely natural, non-chemical, skin conditioning, and safe product, made exclusively for the hot tub industry!

 

Note:

Spa Magic treats up to 500 gallons of water and is good for up to three months.

Penetrating Spa Cleanser treats up to 500 gallons of water, cleans the spa system, and prepares it for Spa Magic.

Application Directions
For both Spa Magic and Penetrating Spa Cleanser

Application Directions
For Penetrating Whirlpool Cleanser

Usage Tips and Hints
For using Spa Magic Water Treatment

Filter Cleaning Tips

Bio-Based

SpaMagic Enzymes (pdf)

MSDS Sheets

•	Spa Magic Water Treatment
•	Penetrating Spa Cleanser

Research and Laboratory Test Results

Testimonials

Call and ask how you can receive a free bottle!

Links
British Columbia, Canada
Colorado
Portland, Oregon
Washington State